Kyocera Mita FS-9500DN Operation Manual page 141

7
Enter the mailbox name in the Mailbox Name, and the
tray number in the Virtual Output Tray, and then click
the Save button.
NOTE
Multiple virtual mailbox tray number can be specified at
a time using commas (,) and hyphen (-).
The Mailbox Name will be displayed in the Defined
Names list box.
8
Click the OK button to quit the Hard Disk Settings dia-
log box.
9
In the Kyocera FS-9100DN KX Properties dialog box,
click the OK button.
10
Click the X button in the upper-right side of the dialog
box.
To print, proceed as follows.
Chapter 3 Printing Through Application Software
3 3 3 3 Using VMB Printing
1
Browse File > Print. The Print dialog box will be dis-
played.
2
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX.
3
Select the range of the pages you want to print in the
document, All or Current page in Page range. To print
part of the document, check Pages, then enter page
numbers separated by commas.
4
Specify the number of copies you want to print in the
Number of copies combo box in Copies.
3-16