Kyocera Mita FS-9500DN Operation Manual page 87

Chapter 6 Maintenance
10
Remove the seal from the rear of the old waste toner
box, and then close the opening of the box with the
seal. Seal up the old waste toner box with the supplied
plastic bag and dispose it.
11
Gently pull the cleaning knob as far as it will go, push
and pull it several times, and then push it back in.
12
Take out the new grid cleaner from the protective bag,
and then remove the cap from the grid cleaner.
6-3
13
Attach the grid cleaner to the printer aligning with the
notches.
14
Gently pull the charger unit as far as it will go, push and
pull it several times, and then push it back in.
When the grid is clean, remove the grid cleaner from
the printer and dispose of it. The grid cleaner is not re-
usable.
15
Fit the new waste toner box to the printer.