Using The Document Finisher (Df-75) - Kyocera Mita FS-9500DN Operation Manual

3.5 Using the Document Finisher
(DF-75)
DF-75 provides the staple, punch and double-sided stitching
print functions.
1
Browse File > Print. The Print dialog box will be dis-
played.
3
2
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX.
3
Select the range of the pages you want to print in the
document, All or Current page only in Page range.
To print part of the document, check Pages, then enter
page numbers separated by commas.
4
Specify the number of copies you want to print in the
Number of copies combo box in Copies.
5
Click the Properties button and then click the Output
tab.
6
Click on the Output to drop down list. Select Finisher
[Face-down] or Finisher [Face-up]. To use the staple
or punch function, select [Face-down].
Chapter 3 Printing Through Application Software
Finishing Options
Collate:
Reverse
Page Order: prints in the reverse page order.
Staple:
Offset:
Punch:
7
Click the Layout tab, check the Booklet Mode check-
2
box, and then select Left Edge Binding or Right Edge
Binding.
4
8
Click the Media tab, and then click on the Page Size
drop down list. Select the proper page size. A5 was se-
lected for the following example.
sets whether the pages are collated or
not.
selects the staple position: Upper Left,
Upper Right or Booklet (stitching posi-
tion).
outputs pages while shifting them alter-
nately for each document.
selects the hole punch type: 2-Hole, 3-
Hole or 4-Hole.
3-8