Chapter 2
This section explains how to set defaults on option devices in-
stalled on the printer. Setting made in this way will become ef-
fective for all application software. To temporarily change the
settings, make printer settings from the application. See
ter 3 Printing Through Application
2.1 Adding Option Devices (Setup)
The Device Settings tab enables you to setup option devices
such as paper feeder so that the printer can recognize them.
Each printer has a unique set of options that are listed in the
Device Settings window. If you have attached one or more
printer options, check that option.
2.1.1 Installing the Paper Feeder (PF-70)
Check that the option paper feeder (PF-70) is installed on the
printer correctly.
1
Browse Start > Settings > Printers.
2
Right click on the Kyocera Mita FS-9100DN KX or
Kyocera Mita FS-9500DN KX icon and then click
Properties.
The Properties dialog box is displayed.
2-1
Setting the Defaults
Chap-
Software.
PF-70
3
Click the Device Settings tab.
4
Check Paper Feeder (cassette 3, 4) in the Device
Options list box.
5
Click the OK button.