Kyocera Mita FS-9500DN Operation Manual page 136

Chapter 3 Printing Through Application Software
The Job Settings dialog box will appear.
6 Check the Job Storage checkbox and then check the
Quick Copy.
7
Click the OK button. The Print dialog box is displayed
again. Click the OK button to start printing. The print
job will be saved to the hard disk as it is printed.
If additional copies are required, print using the Quick
Copy sub menu in the e-MPS menu at the printer oper-
ator panel. For details, see
Guide.
3-11
Chapter 3 in the Operation
Proof and Hold Printing
You can check the first copy before printing the remaining cop-
ies, paper wastage can be avoided. The print jobs will be deleted
when the printer is turned off.
To print, proceed as follows.
1
Browse File > Print. The Print dialog box will be dis-
played.
2
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX.
3
Select the range of the pages you want to print in the
document, All or Current page in Page range. To print
part of the document, check Pages, then enter page
numbers separated by commas.
4
Specify the number of copies you want to print in the
Number of copies combo box in Copies.