Kyocera Mita FS-9500DN Operation Manual page 31

Hide thumbs Also See for FS-9500DN:
Table of Contents

Advertisement

Chapter 3 Using the Operator Panel
9
Press the ENTER key. If you entered an access code
for the printer driver, the ID input line appears. Enter
the four-digit access code entered in the printer driver.
To enter the ID, Press the 1 or 2 key to move the cur-
sor to the number to be changed and then enter the
correct number by pressing the 3 or 4 key.
>Agenda
ID
0000
10
Press the ENTER key. You can specify the number of
copies to print. To increase the copy count, press the 3
key; to decrease the 4 key.
>Agenda
Copies
11
Press the ENTER key to finalize the copy count. The
printer prints the specified number of copies for the job.
>Agenda
?Copies
Q Q Q Q Deleting a Stored Job
1
Follow steps 1 through 8 in the above section.
2
When the title of the job to be printed is displayed
(Agenda, in this example), press the ENTER key.
>Agenda
Copies
3
Press the 4 key repeatedly until Delete appears for
the number of copies.
>Agenda
Delete
4
Press the ENTER key. The stored job is deleted from
the hard disk.
Printing a List of Code Jobs
If you select Permanent Job Storage on the printer driver, you
can have a List of Code Job printed using the operator panel.
The List of Code Job may be used to read the barcode ID for
the stored job you want to reprint by using a barcode reader.
See
Appendix D Option
Units.
A sample Code Job List is shown
1
Press the MENU key.
3-15
001
001
001
on page
3-15.
2
Press the 3 or 4 key repeatedly until e-MPS > ap-
pears.
e-MPS
3
Press the 2 key.
4
Press the 3 or 4 key repeatedly until >List of Code
JOB appears.
>List of
Code JOB
5
Press the ENTER key. A question mark (?) appears.
>List of
Code JOB ?
6
Press the ENTER key again. The printer prints a Code
Job list as shown below.
Retrieving Jobs from Virtual Mailbox (VMB)
To retrieve the jobs posted in the virtual mailbox, proceed as fol-
lows.
1
Press the MENU key.
2
Press the 3 or 4 key repeatedly until e-MPS > ap-
pears.
e-MPS
3
Press the 2 key.
4
Press the 3 or 4 key repeatedly until >Print VMB
Data appears. The virtual mailbox number will also ap-
pear.
>Print VMB Data
Tray001:
>
>

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-9100dn

Table of Contents