Av Spring On Fuel Tank - Stihl MS 261 User Manual

2
1
: Pry out the AV spring (1).
: Remove the complete
bracket (2).
2
1
: Unscrew the AV spring (1).
: Unscrew the bearing plug (2).
– Check the AV spring and plug,
replace if necessary.
MS 261, MS 261 C
2
1
: Screw home the bearing plug (2)
as far as stop.
: Screw the AV spring (1) into the
bracket (arrow) as far as stop.
– Reassemble all other parts in the
reverse sequence.
9.3

AV Spring on Fuel Tank

– Remove AV spring from
handlebar, b b 9.4
– Remove the stop buffer, b 9.5
1
1
: Take out the screws (1).
: Press the tank housing (2) down
a little and hold it there.
1
: Pull the AV spring (1) out of the
guide (arrow) and remove it from
between the crankcase and tank
housing.
– Check the AV spring and plug,
replace if necessary.
Installing
3
1
: Press the tank housing (2) down
a little and hold it there.
2
: Push the AV spring (1), bearing
plug (3) first, between the
crankcase and tank housing.
2
77