Fuel Hose - Models With Manual Fuel Pump - Stihl MS 261 User Manual

1
– Line up straight face of
connector (1) with hump on fuel
hose (2) (see arrows).
: Push the connector (1) into the
fuel hose (2) as far as stop.
2
: Push the connector (2) into the
fuel suction hose.
: Line up the fuel hose (1) and
connector with the
channel (arrows).
: Fit the fuel hose (1) in the
channel (arrows).
MS 261, MS 261 C
2
: Use hook 5910 893 8800 to
remove the fuel suction hose (1)
from the fuel tank.
Do not overstretch the fuel suction
hose.
– Fit the pickup body, b
– Close the tank cap.
– Reassemble all other parts in the
1
reverse sequence.
12.11.3 Fuel Hose – Models with
Manual Fuel Pump
– Remove the filter base, b 12.3
– Open the tank cap.
: Pull the furl suction hose (1) off
the nipples (arrows).
– Remove the carburetor, b 12.5
1
2
1
: Pull out the connector (1) with
fuel return hose (2).
: Pull the fuel return hose (2) off
the nipple on the fuel
pump (arrow).
b 12.11.1
2
1
: Pull the connector (1) off the fuel
return hose (2).
1
1
2
3
: Install a new fuel return hose (2)
and new fuel suction hose (1),
inspect the connector (3) and
replace if necessary.
125