Stihl MS 261 User Manual page 146

1
: Push the pin and socket together
until they lock.
: Push the insulating tube (1) over
the connector.
: The insulating tube must be
seated in the guide (arrow).
: Push the wire fully into the
guide (arrows).
MS 261, MS 261 C
1
: Push the pin and socket together
until they lock.
: Push the insulating tube (1) over
the connector.
1
: Position the wire (1) so that it is
behind the insulating tube (2).
: Press the insulating tube into the
guide (arrows).
1
: Push the wiring harness (1) into
the guides (arrows).
Make sure the wires are laid neatly
and straight (no loops).
2
: Push the cover (1) into its
seat (arrows).
Make sure that the wires are not
pinched.
The wires with protective tube (1)
must be properly seated (arrow).
1
1
145