Fuel Tank - Stihl MS 661 Manual

Installing
1 1
2
– Use STIHL press fluid to make
installation easier, b 16
: Push the annular buffer (1) onto
the handlebar holder (2) as far as
stop – the taper must be properly
seated.
: Screw the AV spring (3) with
bearing plug (4) onto the
handlebar holder (arrow) as far
as stop.
1
2
: Push the handlebar holder (1),
annular buffer (2) first, into its
seat (arrow) and place the
bearing plug (3) in position.
MS 661, MS 661 C-M
4
3
: Push pegs (arrows) into
handlebar (1) and fit handlebar
holder (2) in position.
1
1
: Insert and tighten down the
screws (1) firmly.
3
: Insert and tighten down the
screw (1) firmly – bearing plug is
now secure.
– Reassemble all other parts in the
reverse sequence.
10.3
1
2
1
: Remove screw (1) from
handlebar.
3
2
1
1
: Take out the screws (1) and
remove the cover (2).
: Ease the handlebar (3) sideways
and take it out of the guide.
1
1
1
: Remove the screws (1) from the
underside of the machine.
AV Element on Fuel Tank
81