Air Guide Shrouds - Stihl MS 261 User Manual

12.4

Air Guide Shrouds

– Remove the fan housing, b 8.2
– Remove the filter base, b 12.3
– Remove the throttle rod,
b 10.3.4
– Remove the carburetor, b 12.5
– Remove the carburetor carrier,
b 12.8
– Pull the boot off the spark plug.
1
: Lift the air guide shroud (1) a little
and pull out the ignition lead (2)
– take care not to distort the air
guide shroud.
: Take out the screw (1).
: Lift the air guide shroud (2) a little
and pull it out of its seats.
100
: Pull out the shutter (1), check it
and replace if necessary.
2
1
: To simplify disassembly, lift the
bottom of the air guide shroud (2)
slightly during the following steps.
: Push the tab (1) towards the
clutch side and lift the air guide
shroud (2) out of its seat.
2
2
1
: Push the tab (1) towards the
ignition side and lift the air guide
shroud (2).
1
1
: Pull the air guide shroud (1) out
of its seats and lift it away,
removing the fuel hose (2)
through the opening (arrow) at
the same time.
Installing
2
: Push the shutter (1) into the
guide until it snaps into place.
1
: Fit the fuel hose (1) through the
opening (arrow) from the
underside of the air guide shroud.
2
1
1
MS 261, MS 261 C