Air Guide Shrouds - Models With Manual Fuel Pump; Air Guide Shrouds - Stihl MS 261 User Manual

: Push the air guide shroud (1) into
its seats (arrows).
1
: Press the air guide shroud (1)
into its seat until the tab (2) snaps
into place.
1
: To simplify assembly, lift the
bottom of the air guide shroud (2)
slightly during the following steps.
: Push the tab (1) towards the
clutch side and under the edge of
the housing (arrow).
MS 261, MS 261 C
2
1
1
: Push the lugs (2) of the air guide
shroud (1) into their
seats (arrows).
2
1
– Place the air guide shroud (1) in
position.
: Insert and tighten down the
screw (2) firmly.
1
2
: Lift the air guide shroud (1) a little
and place the ignition lead (2) in
the guide
– take care not to distort the air
guide shroud.
– Press the ignition lead (2) fully
2
into the guide.
– Reassemble all other parts in the
reverse sequence.
12.4.1 Air Guide Shrouds –
Models with Manual Fuel
Pump
– Remove the fan housing, b
– Remove the filter base, b 12.3
– Remove the throttle rod,
b 10.3.4
2
– Remove the carburetor, b 12.5
– Remove the carburetor carrier,
b 12.8
– Pull the boot off the spark plug.
1
2
: Lift the air guide shroud (1) a little
and pull out the ignition lead (2)
– take care not to distort the air
guide shroud.
b 8.2
2
101