Appendices; Technical Specifications - MGE UPS Systems 4000 RT Installation And User Manual

8.1 Technical specifications

Output power
Electrical supply network
◗ Rated input voltage
◗ Input voltage range
◗ Frequency
◗ Power factor
◗ Leakage current
Load output
◗ Voltage
◗ Frequency
Harmonic distortion
◗
◗ Overload capacity
Battery
Environment
◗ Operating temperature range
◗ Relative humidity
◗ Storage temperature range
◗ Altitude
◗ Noise level
(1) If the output voltage is 200V - 250V, the output power is 4500VA / 4000W.
(2) With one EXB module or more, the standard output power is 5000VA / 4000W.
(3) Values for 70% / 100% of UPS output.
(4) Programmable: 200V / 208V / 220V / 230V / 240V / 250V using the UPS Config software.
(5) Frequency-converter mode is programmable using the UPS Config software.
Pulsar MX 4000 Pulsar MX 5000
4000 VA /
3600 W
Single phase 230 V
120 / 156 V to 280 V
50/60 Hz (autoselection)
> 0.99
7 mA max.
Single phase 230 V ±3%
50/60 Hz ±0,5%
< 3%
105% continuous, 110% 2min,
125% 1min, > 150% 0.5s
15 x 12V - 5 Ah, 15 x 12V - 5 Ah,
sealed lead acid, sealed lead acid,
maintenance free maintenance free
20% to 90% (non-condensing)
0 to 1000 m without derating
< 45 dBA

8. Appendices

Pulsar MX EXB
(1)
5000 VA /
(2)
4500 W
(3)
(4)
(5)
Two 15 x 12 V - 5 Ah
strings, sealed lead acid,
maintenance free
0°C to 40°C
-25°C to 40°C
34008030EN/AA
- Page 35