Reset Or Disable Lcm - MGE UPS Systems 4000 RT Installation And User Manual

Reset or disable LCM

In case of any LCM messages displayed:
For temporary reset: press the escape button (24) more than 3 seconds, into Status and Alarm
◗
the alarm status.
The alert will be repeated twice each 30 days.
◗ For permanent reset: press the enter button (27) more than 3 seconds, into LCM warning screen, to cancel permanently this
LCM event.
At any time:
To Disable all LCM messages select
Be careful: you will not be aware of any LCM events that can happen on the UPS if you disable all LCM messages.
6. Life Cycle Monitoring (LCM)
" "
disable all ,into LCM menu with LCD navigation.
screen, to cancel temporary
- Page 31
34008030EN/AA