Operation On Battery Power; Return On Normal Ac Source - MGE UPS Systems 4000 RT Installation And User Manual

Mge ups systems installation and user manual pulsar mx 4000 rt, 5000 rt
Table of Contents

Advertisement

3.4 Operation on battery power

When the Normal AC source is not available, the load continues to be protected by the UPS.
Power is supplied by the battery.
Transfer to battery power
Low battery warning
End of backup time

3.5 Return on Normal AC source

After an outage, the UPS restarts automatically when Normal AC source is restored (unless this function has been disabled
via UPS personalisation) and the load is supplied again.
3. Operation
LEDs (20), (21) are ON.
LEDs (31), (32), (34) are green.
The audio alarm beeps every 10 seconds.
The equipments are protected by the UPS
and supplied by the battery.
The display indicates the battery remaining
backup time.
LEDs (20), (21) are ON.
LEDs (31), (32), (34) are green.
The audio alarm beeps every 3 seconds.
The remaining battery power is low.
Shut down all applications on the connected
equipment because automatic UPS
shutdown is imminent.
LED (22) is ON.
LED (34) is red.
The audio alarm beeps continuously.
The equipments are not powered.
"
The UPS displays
End of backup time
"
Battery low
.
34008030EN/AA
- Page 23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pulsar mx 4000 rtPulsar mx 500 rt

Table of Contents