Table of Contents
Advertisement
8-4. Audio Error Messages
When an error occurs, the printer produces an audio error message.
On-Line
Warning output
Error
Auto recovery error
Errors that can be
recovered from
Errors that cannot be
recovered from
*1 Near-end detection does not work until the paper is fed for 100 mm after the cover is opened and then closed.
*2 Output 5 seconds after a cover open error occurs.
Status
Paper roll near-end detection*1
Thermal head high temperature
detection error
Cover open error*2
Paper out error
Black mark error
Cutter error
Flash error
EEPROM error
SRAM error
Head thermistor error
Power voltage error
Paper Near End, please prepare for the paper refill.
Head Temperature is too high, please wait until Power lamp
turns on.
Please close the printer cover.
Paper end. Please refill paper.
Black Mark error is detected.
Please confirm the specification according to the Users Manual.
Cutter error.
Please refer to the Users Manual for recovery.
Flash ROM error. Please turn off the printer and refer to the Us-
ers Manual for recovery.
EEPROM error. Please turn off the printer and refer to the Us-
ers Manual for recovery.
SRAM error. Please turn off the printer and refer to the Users
Manual for recovery.
Thermistor error. Please turn off the printer and refer to the Us-
ers Manual for recovery.
Power Voltage error. Please turn off the printer and refer to the
Users Manual for recovery.
- 35 -
Audio Message
Hide quick links:
Advertisement
Table of Contents
