Effective Print Width; Thermal Label Paper Roll (Tack Label Paper And Full-Face Thermal Label Paper); Paper Roll Specifications - Star Micronics FVP10 series Hardware Manual

5-1-2. Effective Print Width
Paper width
(mm)
79.5 ± 0.5
57.5 ± 0.5
5-2. Thermal Label Paper Roll (Tack label paper and full-face thermal label paper)
5-2-1. Paper Roll Specifications
(1) Total paper thickness: 150 µm or less
(2) Paper width:
(3) Outer roll diameter:
(4) Core inner and outer diameters:
(5) Printed surface:
Note 1: Set the tension lever to the position for paper thicknesses greater than 100 µm and up to 150 µm.
2: Set the slide lever to the position for paper thicknesses greater than 100 µm and up to 150 µm.
3: Do not glue or tape the paper roll and shaft core together.
4: Do not fold the tail end of paper.
5: When using tack label paper, be sure to cut the backing paper.
Left and right margins
(mm)
4
2.75, 3, 3.6
Left margin

Effective print width

Paper width
79.5 ± 0.5 mm
ø83 mm or less
Take up paper roll width: 80
core inner ø25.4 ± 1 mm, core outer ø32 ± 1 mm
* Do not use inner-wrapped paper rolls.
Outer edge of roll
Effective print width
(mm)
72
52.5, 52.0, 50.8
Right margin
+0.5 +0.5
mm
mm or 58
- 1
- 1
- 25 -
Number of print columns
(12 × 24 font)
48
35, 34, 33