Table of Contents
Advertisement
(6) Connect the PoweredUSB interface cable to the connector on the PoweredUSB interface board.
3-2-5. Ethernet Interface Cable
(1) Make sure that the AC adapter's power cable plug is not connected to the outlet.
(2) Connect the Ethernet interface cable to the connector on the Ethernet interface board.
Link disconnection detection feature
g
The Ethernet interface model is equipped with a link disconnection detection feature.
If the printer is turned on when an Ethernet cable is not connected to it, the POWER and ERROR lamps are simultane-
ously turned on and off at 2-second intervals to indicate the disconnection.
Be sure to connect the Ethernet cable from a PC or hub to the printer, and then turn the printer on.
PoweredUSB
interface cable
Ethernet
interface cable
- 8 -
Hide quick links:
Advertisement
Table of Contents
