Connecting The Interface Cable To The Printer; Parallel Interface Cable - Star Micronics FVP10 series Hardware Manual

3-2. Connecting the Interface Cable to the Printer
Only a USB cable is provided. If you are using another type of cable, obtain a cable that meets the printer specifications.
Because the appropriate interface cable differs depending on the system that you are connecting the printer to, contact your
dealer if you are unsure about what cable to use.
Before connecting or disconnecting an interface cable, be sure to remove the AC adapter's power cable plug from the
outlet.
CAUTION: Do not connect move than one at any given time.
3-2-1. Parallel Interface Cable
You do not have to affix a ferrite core to a parallel interface cable.
To connect a parallel interface cable, follow the instructions given below.
(1) Make sure that the AC adapter's power cable plug is not connected to the outlet.
(2) Connect the interface cable to the connector on the parallel interface board, and fasten the connector clasps.

Parallel interface cable

- 5 -