Changing The Paper Width - Star Micronics TSP043E Series Hardware Manual

3-7. Changing the Paper Width

Move the paper roll guide to match the paper roll width. When you change the effective print width (paper roll width), change
the printer utility's memory switch setting. For details, see the printer utility help.
* The following procedure is for changing the paper width from 80 mm to 58 mm.
1) Remove the paper roll guide.
2) As shown in the figure, insert the paper roll guide in the groove.
3) Secure the paper roll guide in place by pushing the section marked as "A" in the figure.
Paper width:58mm
Note 1: Do not change the paper width while the printer is in use.
The amount of wear on the thermal head, rubber roller, and cutter varies depending on the paper width.
This varying amount of wear may cause problems in printing and cutting.
2: Do not remove the paper roll guide from the printer when using 80mm width paper.
A
- 13 -
Paper roll guide
Paper width:80mm