Effective Print Width; Thermal Label Paper Roll (Tack Label Paper And Full-Face Thermal Label Paper); Paper Roll Specifications; Recommended Paper Roll - Star Micronics FVP-10U Hardware Manual

5-1-3. Effective Print Width
Paper width
(mm)
79.5 ± 0.5
57.5 ± 0.5
5-2. Thermal Label Paper Roll (Tack label paper and full-face thermal label paper)
5-2-1. Paper Roll Specifications
(1) Total paper thickness: 150 µm or less
(2) Paper width:
(3) Outer roll diameter:
(4) Core inner and outer diameters:
(5) Printed surface:
Note 1: Set the tension lever to the position for paper thicknesses greater than 100 µm and up to 150 µm.
2: : Set the slide lever to the position for paper thicknesses greater than 100 µm and up to 150 µm.
3: : Do not glue or tape the paper roll and shaft core together.
4: : Do not fold the tail end of paper.
5: : When using tack label paper, be sure to cut the backing paper.
Recommended Paper Roll
5-2-2.
Manufacturer
Lintec
Ricoh
Note 1) D epending on the type and thickness of the paper, it may be necessary to change the settings for printing dark-
ness. To change the darkness settings, use the printing darkness settings command <ESC><RS> 'd' n. Refer to
the separate programmer's manual for details.
2) T he print density may vary depending on the type of paper roll, operating environment, and low peak current
mode.
3) A reader or scanner may not be able to scan a printed bar code or characters depending on the print density.
Make sure that your reader or scanner is able to scan them correctly beforehand.
Left and right margins
(mm)

2.75, 3, 3.6
Left margin

Effective print width

Paper width
79.5 ± 0.5 mm
ø83 mm or less
Take up paper roll width: 0
core inner ø25.4 ± 1 mm, core outer ø32 ± 1 mm
Outer edge of roll * Do not use inner-wrapped paper rolls.
Product name
LD2114 (tack label paper and full-face thermal label
paper)
LD5530 (tack label paper and full-face thermal label
paper)
LD3180 (tack label paper)
150LA-1 (tack label paper)
Effective print width
(mm)
72
., .0, 0.
Right margin
+0. +0.
mm
mm or 58
-  - 
-  -
Number of print columns
(12 × 24 font)

, , 
Quality characteristics and use
High sensitivity
High image stability, high thermal
stability
High sensitivity (for distribution)
High thermal stability
(for food labeling)