Table of Contents
Advertisement
Command Line Interface
Command Line Interface Feature
Navigation
6371-A2-GB20-00
The Hotwire DSL Router is managed with text commands from the Command
Line Interface. The Command Line Interface can be accessed:
H
Locally with an ASCII terminal connected to the Console port, or
H
Remotely via a Telnet session.
The Command Line Interface is ASCII character-based and provides the
capability to:
H
Display the syntax of commands.
H
Change the operational characteristics of the DSL router by setting
configuration values.
H
Restore all configuration values to the initial factory defaults.
H
Display DSL router hardware and identification information.
H
Display system status, including DSL link status and Ethernet status.
H
Display a sequence of commands that would have the effect of setting all
configurable parameters to their current value.
Refer to Appendix B,
Configuration Defaults & Command Line
Most terminal emulation programs use the following keys:
H
Enter or Return – Accepts the input.
H
Ctrl-c – Aborts the entry or clears the input line.
H
Down Arrow – Repeats an entry within the last five entered.
H
Up Arrow – Repeats the input selected with the down arrow.
March 2000
A
Shortcuts.
A-1
Advertisement
Table of Contents
