Dhcp Server - Paradyne Hotwire 6321/6322 IDSL Router User Manual

DHCP Server

The DHCP Server can be enabled and disabled, configured by IP address option.
Based on RFC 2131 and RFC 2132, supported options are:
6371-A2-GB20-00
H
Domain Name
H
Domain Name Server
H
Router
dhcp server {enable
Enables or disables the DHCP server.
Minimum access level: Administrator/Config
enable – Enable the DHCP Server.
disable – Disable the DHCP Server. Default = disable.
Example: dhcp server enable
dhcp server addresses lower-ip-address upper-ip-address
Specifies the range of IP addresses to be used by the DHCP server. When the DHCP
address range is changed, all binding entries and dynamic routes are removed.
Minimum access level: Administrator/Config
Example: dhcp server address 132.53.4.2 132.53.4.350
dhcp server leasetime min-lease-time max-lease-time
Specifies the lease-time settings used by the DHCP server.
Minimum access level: Administrator/Config
min-lease-time – Default = 120 minutes (2 hours)
max-lease-time – Default = 4320 minutes (72 hours)
Example: dhcp server leasetime 120 320
dhcp server router ip-address
Specifies the router IP address used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server router 132.53.4.2
dhcp server name domain name
Specifies the domain name used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server name Clearwater7
March 2000
disable }
|
Command Line Interface
A-9