Paradyne Hotwire 6321/6322 IDSL Router User Manual page 60

Command Line Interface
A-12
show arp
Sample show arp display:
ip-addr MAC address
x.x.x.x xx:xx:xx:xx:xx:xx xxxx
NOTES: – The timeout value shown is the actual time left for the specific entry.
– The timeout value shown will be Static for configured static entries.
show arp timeout
ARP timeout for completed ARP table entries = nn minutes
ARP timeout for incomplete ARP table entries = nn seconds
show nat basic
Sample show nat basic display:
NAT basic – { disabled | enabled }
NAT basic – public network address
NAT timeout – xx minutes
NAT basic mappings:
public ip-addr private-ip-addr
x.x.x.x x.x.x.x
show NAT napt
Sample show NAT NAPT display:
NAT napt – { disabled | enabled }
NAT napt – public ip-addr xxx.xxx.xxx.xxx
NAT timeout – xx minutes
NAT napt mappings –
server ip-addr port
x.x.x.x xxxx
March 2000
timeout (minutes) incomplete status (seconds)
xxxx
protocol
{ udp | tcp }
6371-A2-GB20-00