Dsl Router Terminal Emulation; H Dsl Router Terminal Emulation; Accessing The List Command Output - Paradyne Hotwire 6321/6322 IDSL Router User Manual

DSL Router Terminal Emulation

DSL Router Terminal Emulation
The Command Line Interface is available at the DSL router when the Console
cable is connected to a VT100-compatible terminal or a PC running a terminal
emulation program. Verify the terminal settings:

Accessing the List Command Output

Use the list confg command to output command strings needed to restore
the current running configuration. Output from the List Confg command can be
captured to a text file using most terminal emulation programs. Examples of two
VT100-compatible programs are provided.
Once the text file is captured, the DSL router can be placed in configuration
mode. The text file can be fed back to configure the DSL router and save the
configuration.
6371-A2-GB20-00
H
Data rate set to 19.2 kbps (19200 bps)
H
Character length set to 8
H
Parity set to None
H
Stop bits set to 1
H
Flow control set to Off or None
March 2000
C
C-1