Using The List Command; Changing The System Identity; H Exiting From The System - Paradyne Hotwire 6321/6322 IDSL Router User Manual

Using the List Command

Changing the System Identity

"
Exiting from the System
6371-A2-GB20-00
The list command displays a sequence of commands, in the form of ASCII
strings, that would have the effect of setting all configuration settings to the
current values. (The two passwords are not output.)
To determine the commands available at the current login access level, enter the
Administrator mode and enter either:
H
list
Displays the output in on-screen page mode. In on-screen page mode, the
user interface displays 23 lines of information. When the 24th line is reached,
More... is displayed. Pressing any key will display the next page.
H
list confg
Displays the output in scroll mode as a text file. Scroll mode creates a file and
captures all command strings in the text file for use with a terminal emulation
program. Refer to Appendix C,
Procedure
To change the System Identity from the factory default of CUSTOMER>:
1. Login and enter the ADMIN-configuration mode.
2. At the CUSTOMER-CONFIG#> prompt, type the new System identity
(no spaces allowed), press Enter, type save, and press Enter.
system identity new system identity
For example:
system identity Paradyne and press Enter
save and press Enter
3. In this example, after saving the entry and ending the configuration mode, the
System identity will display:
Paradyne #>
You can manually log out of the system, unplug the Console cable, or let the
system automatically log you out. The DSL router will log you out immediately if
you disconnect the Console cable. Any unsaved configuration input will be lost.
March 2000
Accessing the DSL Router
DSL Router Terminal Emulation.
2-5