Dsl Router Configuration Examples; Configuration Examples - Paradyne Hotwire 6321/6322 IDSL Router User Manual

DSL Router Configuration
Examples

Configuration Examples

6371-A2-GB20-00
The Hotwire DSL Router configuration examples include only a few of the
possible scenarios. This chapter covers some of the common configurations.
The command syntax will vary based on your network setup.
Configuration commands require the access level of Administrator-Config and
changes need to be saved while in configuration mode to take effect. Refer to
Chapter 2, Accessing the DSL
The Hotwire DSL Router configuration examples include:
H
Basic Configuration
H
Basic NAT
H
NAPT
H
Unnumbered DSL Interface with Proxy ARP
H
DHCP Relay with Proxy ARP
H
DHCP Server with Basic NAT
H
Downstream Router
Refer to Appendix A, Command Line
syntax.
Refer to Appendix B, Configuration Defaults & Command Line
specific command default settings and abbreviated command line syntax.
NOTES:
— The examples in this chapter are provided to illustrate some of the
features of the Hotwire DSL Routers. Not all possible feature
configurations are covered in the examples.
— The IP addresses used in the examples are for illustrative purposes only.
These addresses are not intended for use when configuring your local
network.
March 2000
Router.
Interface, for specific commands and
4
Shortcuts, for
4-1