Hisun HS 500 Owner's Manual page 76

Operate as the following steps:

Assembling your new UTV.

Ensure main switch is off.
main switch
① Main switch
② OFF
③ ON
④ START
CAUTION
If main switch is not off, ECU can be destroyed by
battery power in on-off condition during the
following connection with cables.

Use screw/nut to connect the connecting
terminals of cables firmly to
battery.
①
Battery
②
Positive Wire Of Cable
③
Positive Wire Of EPS System
ELECTRIC POWER STEERING SYSTEM
○ ○
+ and - of
④
Negative Wire Of Cable
⑤
Negative Wire Of EPS System
⑥
Nut
⑦
Screw
CAUTION
If connection terminals do not fixed, power of ECU
may be constantly on-off during UTV driving, and
finally cause ECU damaged.

Open main switch of UTV, and EPS system
will automatically enter into working state.

Check the meter. If fault indicator light of EPS
system does not be lit, ECU can be for regular
use.

If fault indicator light of EPS system is lit, that
means EPS system find out some fault during
ECU self-checking process, then you should
consult your local dealer for maintenance in
time.
Meter
① Fault indicator light of EPS system
② Fault indicator of EPS system
DANGER
15-5