Checking Brake Pedal; Checking Brake Hose And Pipe; Checking Brake Light Switch - Hisun HS 500 Owner's Manual

① Oil Level
② Dipstick

■ Checking Brake Pedal

CAUTION

Stop the engine and chock the wheels before
checking brake pedal.

If movement is outside of the specifications
contact your local dealer for adjusting the
brake.
◆ Checking the brake pedal free travel
Proper brake pedal
free travel
1. Release the parking brake.
2. Slightly depress the brake pedal and measure
free travel at the top of the pedal stroke.
3. If brake pedal free travel is outside of the
specifications, contact your local dealer for
adjusting the brake.
◆ Checking the brake pedal stroke
Less than 120mm (4.7in.)
Pedal stroke
1. Release the parking brake.
2. Step on the pedal and measure the pedal
stroke.
PERIODIC SERVICE
7 to 14mm
(0.3 to in.)On the pedal
On the pedal
3. If brake pedal stroke is outside of the
specifications, contact your local dealer for
adjusting the brake.
① Brake pedal
② "FREE TRAVEL"

■ Checking Brake Hose and Pipe

1. Check to see that brake hoses and lines are
not swollen, hardened or cracked.
2. Check the brake hoses and fittings for oil
leaks.
3. If there is any abnormality, consult your local
dealer for this service.

■ Checking Brake Light Switch

1. Park the vehicle on a flat surface and raise the
cargo bed.
Turn the key switch to the "ON" position.
2.
3. Step on the brake pedal to check if the brake
light comes on.
4. If it does not, check the bulb or brake light
switch.
■ Checking the Radiator Hoses and Clamps
Park the vehicle on a flat surface and raise the
cargo bed. Check to see if radiator hoses are
properly fixed every 200 hours of operation or six
months, whichever comes first.
1. If hose clamps are loose or water leaks,
tighten bands securely.
2. Replace hoses and tighten hose clamps
securely, if radiator hoses are swollen,
11-13
③ "PEDAL STROKE"