Cleaning Radiator Screen; Checking Brake Fluid Level; Brake - Hisun HS 500 Owner's Manual

① Recovery tank
② FULL
③ LOW
IMPORTANT

If the radiator cap has to be removed, follow
the cautions above and securely retighten the
cap.

Use clean fresh water and anti-freeze to fill the
recovery tank.

If water should leak, consult your local HSUN
Dealer.

■ Cleaning radiator screen

CAUTION
TO avoid personal injury:

Be sure to stop the engine before removing
the screen
1. Park the vehicle on a flat surface,
2. Remove the radiator cover,
3. Detach the screen and remove all foreign
materials,
PERIODIC SERVICE
① Radiator screen
IMPORTANT

Radiator screen must be clean from debris to
prevent engine from overheating

■ Checking brake fluid level

CAUTION
TO avoid personal injury:

Never operate the vehicle if the brake fluid
is below the minimum mark.

Use only DOT3 from a sealed container.
Other types of Brake fluid may ruin
synthetic resin or rubber installed in brake
system components and may cause brake
failure.

Avoid contamination of the brake fluid
thoroughly clean before removing the filler
cap. Do not open the brake fluid reservoir
cap unless absolutely necessary.

Use extreme care when filling the reservoir.
If brake fluid spills on power steering hose,
wash off with water immediately, as brake
fluid quickly ruins synthetic resin or rubber
hoses.
1. Check to see that the brake fluid level is the
LOWER mark.
If it is below the "LOWER" mark add brake
2.
fluid .
11-4