Hisun HS 500 Owner's Manual page 75

frame.
Installation position of steering as follows:
6. Electronic connectivity diagram of EPS system：
① ECU (with waterproof metal box)
② ECU split cable
③ Battery
④ Meter
⑤ Steering torque sensor
⑥ Motor
⑦ Speed sensor
⑧ Main switch
⑨ Fuse
7. Meter：
Meter is an important part of UTV.
Meter works together with EPS system and
ELECTRIC POWER STEERING SYSTEM
monitors working condition of EPS system.
Fault can be displayed by fault indicator light and
fault indicator of EPS system, so the driver can
acknowledge fault of EPS in time and take some
measures to keep himself/herself safe.
When fault occurs on EPS system, fault indicator
light will be lit up. At the same time, fault indicator
of EPS system will display the fault code for
maintenance.
① Fault indicator light of EPS system
② Fault indicator of EPS system
Fault code diagram
Fault
No.
code
1#fault of steering
1 F00001
torque sensor
2#fault of steering
2 F00002
torque sensor
3 F00006 ECU overheating
low voltage battery
4 F00005
alarm
Dynamic motor without
5 F00003
power alarm
Fault
6 F00011
sensor
7 F00010 ECU non-working
OPERATION AND USE OF EPS SYSTEM
■ EPS system operation
15-4
Fault indicator
Fault style light of EPS
system
of speed
lit
lit
lit
lit
lit
lit
lit