Machine Troubleshooting - Hisun HS 500 Owner's Manual

MACHINE TROUBLESHOOTING

Trouble
Non agility for Gearshift
Transmission noise
Less vehicle power
No good brake or noise
If you have any questions, consult your local dealer.
TROUBLESHOOTING
Cause

High idling speed of engine

High rotary speed for clutch
connection.

Not good adjustment
gearshift stay wire.

Gear abrasion

Big matching clearance for the
inner and outside gears of
transmission shaft

Big clearance of transmission
gears.

Not good connection of gear
end face

Parking brake

Not full Uncoupling
brake

CVT transmission sliding

Less brake oil

Air inside the braking system.

Brake discs abrasion

Assembling bolt of disc plate
loose

Assembling bolt for disc brake
clippers loose

Replace throttle cable;

Replace throttle petal

Replace he throttle

Replace he junior clutch spring;

Replace the primary clutch.

Put the gearshift rod into the
position of "N".

for Put the gearshift arm of engine
into "N".

Adjust the stay wire and the bolt.

Lock tightly.

Replace the gears

Replace the gears

Replace the gears

Replace the gears

Loosen the lay-up rod
for disc

Contact the distributor.

Removing the grease for the
clutch.
Replace CVT transmission belt
Replace the clutch.

Check the braking oil level

Contact the distributor.

Contact the distributor.

Lock tightly

Lock tightly
13-4
Countermeasure