Inflation - Hisun HS 500 Owner's Manual

2. Check steering power in static condition
Let UTV stop on the level road, steering wheel is
placed in a straight forward position.

Check tire inflation pressure whether meet
specified requirements (see tire instructions or
UTV user manual).
If necessary, refill it.
 Check front wheel's front beam, wheel offset
positioning whether is correct (see UTV user
manual).
If necessary, adjust it.

Open the main switch.

Turn the steering wheel left and right
successively, turning force on both sides
should be equal.
Turn the steering wheel to rotate back and forth;
turning shall be smoothly, no block, no recoil forces
which opposite of operation force.
If any problem found, it must driven to dealer and
repair it immediately.
3. Steering force's checking during running
conditions：

During running process, the feeling of steering
force to the left and right must be consistent.

During steering, turning shall be smoothly, no
■ Solutions for common fault：
1. Open the main switch, no auxiliary power of left and right steering.
S/N FAULT PHENOMENON
Meter
1
code:F00010
Meter warning fault code：
2
F00001&F00002
ELECTRIC POWER STEERING SYSTEM
Special fuses of ECU is blown in
warning fault
fuses box (see figure 1), Or ECU
is damaged
Sensor is damaged or sensor's
connector with bad contact or
ECU is damaged
block, no recoil force which opposite of
operation force.

During return process, the return force is equal
to the velocity at both left and right directions.
If any problem occurs, it must driven to dealer and
repair it immediately.
FAULT POINT
15-8
SOLUTION
Replace fuses. To dealers
for repair
To dealers for repair