Checking Brake Pedal; Checking Parking Brake; Checking Head Light Turn Signal Light Etc; Checking Seat Belt And Rops - Hisun HS 500 Owner's Manual

① OIL CUP

■ Checking brake pedal

CAUTION
TO avoid personal injury:

Stop the engine and chock the wheels
before checking brake pedal.
1.Inspect the brake pedals for free clearance and
smooth operation.
Adjust if incorrect measurement is found. (see
checking brake pedal in" EVERY 200 HOURS in
PERIODIC SERVICE section)
① Brake pedal
③ PEDAL STROKE

■ Checking parking brake

Use the parking brake to stop, depress the brake
pedal to release the park.
Make sure the parking brake warning lamp on the
easy Display goes off when parking brake lever is
down.
PERIODIC SERVICE
② LOWER
② FREE TRAVEL
① Parking brake
■ Checking gauges ,meter and Display lamps
1. Inspect the instrument panel for broken
gauges, meter and Display lamps.
2. Replace if broken.

■ Checking head light turn signal light etc

1. Inspect lights for broken bulbs and lenses
2. Replace if broken

■ Checking seat belt and ROPS

1. Always check condition of seat belt and ROPS
attaching hardware before operating vehicle.
2. Replace if damaged.
■ Checking CV joint boot
1. Check to see if the joint boots are damaged.
2. If the boots are cut gashed or show signs of
deterioration. consult your local dealer.
11-5