Head Light Switch; Hazard Light Switch; Turn Signal Light Switch; Lights - Hisun HS 500 Owner's Manual

① Seat belt
2. Selecting light switch position.

■ Head Light Switch

Turn on the key switch and turn the head light
switch to the "ON" position.
Turn the head light switch to the "OFF" position to
turn off the head light.
① Head light switch
② Head lights "OFF"
③ High beam lights "ON"
④ Low beam lights "ON"
⑤ 4WD button
⑥ 2WD button
⑦ Front axle differential lock
⑧ Front axle differential unlock
⑨ Emergency light "ON"
⑩ Emergency light "OFF"
⑪ Winch cable release
⑫ Winch cable pulled up
⑬ Left turning lights
⑭ Right turning lights
⑮ Plug cover
NOTE：
Turning the head light switch to the "ON" position
causes the following lamps to light simultaneously.
1. Tail lights (lamps at the rear portions of the
vehicle)
2. Lamp built in the coolant temperature gauge
3. Lamp built in the fuel gauge
4. Lamp built in the speedometer
5. Front left and right position lights

■ Hazard Light Switch

[if equipped]
Press the top half of the hazard light switch, the
hazard light flash along with the indicator on the
instrument panel. Press the bottom half of the
hazard light switch to turn off the hazard light.
Note:

The hazard light switch is operative when the
key switch is in the "ON" or "OFF" position.
Be careful that keeping the switch "ON"
causes the battery to run out.

■ Turn Signal Light Switch

[if equipped]
To indicate a right turn, push on the lower half of
the turn toggle switch.
To indicate a left turn, push on the upper half of the
turn toggle switch.
When the left or right signal is activated, the
indicated turning light will flash and the other will
stay on.
The indicator lamp at the instrument panel also
flashes indicating the direction of the turn.
NOTE:

The turn signal light switch only operates
8-2