Service Parameters (Au And Su) - Alvarion BreezeAccess II System Manual

Menus and Parameters
algorithm is enabled, then the Runtime Noise Floor is the higher of
the following two values:
a. The configured Noise Floor.
b. Calculated Noise Floor: Average RSSI[dBm] – Delta - Fading
Factor – 2dB.
Where Delta is a hard coded value that may differ among product
types. Fading Factor is a configurable parameter as described
below.
The Runtime Carrier Sense Level, will be the higher of:
a. Carrier Sense Level
b. Calculated Noise Floor as defined above (Average RSSI[dBm] –
Delta - Fading Factor – 2dB) + Carrier to Interference Difference
Level.
The Adaptive Thresholds menu includes the following parameters:
" Adaptive Thresholds Option – Enables or disables the
adaptive thresholds algorithm.
The default is Disable
" Adaptive Thresholds Period – Enables defining the interval
between consecutive updates of the runtime values when the
adaptive threshold algorithm is enabled.
Valid values: 1-60 seconds
The default is 15 seconds
" Adaptive Thresholds Fading Factor – Enables defining the
Fading Factor to be used in the formula for calculating the Runt-
ime Noise Floor. The higher the expected variance in levels of
received signal, the higher this value should be.
Valid values: 0-70 dB
The default is 10 dB

Service Parameters (AU and SU)

The Service Parameters menu includes the following parameters:
! User Filtering Parameters – Only available in SUs. Defines IP
addresses of user's devices that are authorized to access the
wireless media, serving for security and/or control purposes. It can
also be used to enable transmission/reception of specific protocol
frames only. These filtering functions do not affect management
frames that are sent to or generated by the unit or.
Choose this option to define the following parameters:
" User Filtering Option – Disables or enables the User Filtering
feature. The available options are:
BreezeACCESS Version 4.5 System Manual
2-91