Alvarion BreezeAccess II System Manual page 241

Menus and Parameters
#
#
#
#
#
#
! Ring Frequency - Defines the ring frequency parameters (that
define the ringing of the telephone set), if the selected Telephony
Country parameter is Proprietary. The following parameters can be
defined:
" Ringer Frequency – the frequency of activating the Ringer.
" Cadence On – The ringing time (on) in the ringing-silence
sequence of the Ringer.
" Cadence Off – The silence time (on) in the ringing-silence
sequence of the Ringer.
" Duration - The maximum duration of activating the ringer.
Ringing will cease upon detecting off-hook condition.
! Timeouts – Defines the following timeouts:
" Min. Flash Detect Timeout and Max. Flash Detect Timeout –
A short on-hook time that is between the values of these two
parameters will be considered as Hook Flash.
Frequency 2 – The second of the two frequencies to be used
for generating the applicable tone.
Valid values are 0-3000 (in Hz).
Level 1 – The level (in dBm) of Frequency 1.
Valid values are –32 to +3.
Level 2 – The level (in dBm) of Frequency 2.
Valid values are –32 to +3.
Cadence On – The ringing time (on) in the tones-silence
sequence of the tone (not applicable for Dial Tone).
Valid values are 100 – 10,000 milliseconds, 0 (0 means that
the tone is not used).
Cadence Off – The silence time (off) in the tones-silence
sequence of the tone (not applicable for Dial Tone).
Valid values are 100 – 10,000 milliseconds, 0 (0 means no
silence – a continuous tone).
Duration – The maximum duration of transmitting the tone
to the earphone. Tone generation will cease upon hang-up.
Valid values are 0 – 10,000 seconds.
Valid values are: 17Hz, 20Hz, 25Hz, 50Hz.
Valid values are 100 – 10,000 milliseconds.
Valid values are 100 – 10,000 milliseconds.
Valid values are 0 – 10,000 seconds.
Valid values: 210 – 2,000 milliseconds, in steps of 10 ms.
Default: country-specific.
BreezeACCESS Version 4.5 System Manual
2-111