Show Basic Parameters; Show Advanced Parameters; Show All Parameters - Alvarion BreezeAccess II System Manual

Menus and Parameters
The following parameters appear for GPS Modules only:
! Unit Status – Indicates the status of the GPS antenna. Either one of
the following messages may be displayed:
" UTC is available; date..; time..: This message indicates
that the GPS antenna has synchronized with the satellite system
and that the BS-GU is functioning properly. The message may
include an incorrect time and date, such as a date in 1999. This
indicates that the GPS antenna has not yet synchronized with
the GPS satellites system.
–Or–
" UTC time is not available: This message indicates that the
BS-GU is not getting timing signals from the GPS antenna. If the
antenna is functioning and properly connected to the module,
this may be because the antenna has not yet synchronized with
the GPS satellite system.
! Master/Slave Operation Mode – A message indicating the
operation mode of the unit "Unit is working as Master" or "Unit is
working as Slave" is displayed.

Show Basic Parameters

The Show Basic Parameters menu displays the current values of the
parameters included in the Basic Configuration menu
(see Basic Configuration Menu‚ page
Installer access rights, several security related parameters are not
displayed. The display includes some additional useful read-only
information such as the Number of Hopping Frequencies in SU and
AU.

Show Advanced Parameters

The Show Advanced Parameters menu enables access sub-menus that
display the current values of the parameters included in the applicable
sub-menus of the Advanced Configuration menu
(see Advanced Configuration Menu‚ page
or Installer access rights, several security related parameters are not
displayed. The display includes some additional read-only information
such as Number of Hopping Frequencies (Air Interface Parameters).

Show All Parameters

The Show All Parameters menu displays the current values of all the
parameters included in the Advanced Configuration menu. When using
Read-Only or Installer access rights several security related parameters
are not displayed. The display includes some additional useful read-only
information such as the Number of Hopping Frequencies (SU and AU).
2-14). When using Read-Only or
2-37). When using Read-Only
BreezeACCESS Version 4.5 System Manual
2-5