Maintenance; Variable Speed Switch - Power Fist SS13W Owner's Manual

MAINTENANCE

WARNING: FOR YOUR OWN SAFETY, ALWAYS PUSH THE OFF SWITCH "O" AND UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE MAINTAINING OR
LUBRICATING YOUR SAW.
GENERAL
• An occasional coat of paste wax on the work table will allow the wood being cut to glide smoothly
across the work surface
MOTOR
• If the power cable is worn, cut or damaged in any way have it replaced immediately. Don't attempt to oil
the motor bearings or service the motor internal parts
• Before starting to use the scroll saw make sure you are aware of all its features and know how to turn the
machine on and off. Follow all safety guide lines laid down in pages 5 and 6 of this manual
• The On/Off switch is located at the side of the machine. This means that in the event of a power failure
the machine will only restart by manually pressing the green (I) button. To switch the machine ON press
the green (I) button. To switch the machine OFF press the red (O) button

VARIABLE SPEED SWITCH

• The variable speed switch is located at the same position as the On Off switches, and is a dial with
an indicator arrow showing L and H for speed control. Turn clockwise to increase speed and counter-
clockwise to decrease speed
For any technical questions, please call 1-800-665-8685
Variable speed and ON/OFF
switch control panel
10
8159642