Table of Contents
Advertisement
Available languages
Available languages
V1.0
After prolonged cutting, the wax will cling to the pulleys of your portable
band saw. This does not affect the operation of the machine. All that is
necessary is to disconnect the machine from the power source and wipe the
wax from the pulleys.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Keep the tool clean, dry and free from oil/grease at all times.
6.
Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
1.
Remove all swarf from the machine with a vacuum cleaner or compressed
air. Focus on removing dust from the motor' s fan vents.
2.
Thoroughly clean all surfaces.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
1.
Components should be kept dry, with machined surfaces lightly oiled.
2.
Always remove the saw blade and store in a safe place.
3.
Never store equipment in a wet/damp environment.
LUBRICATION
Inspect and lubricate the tool when required. Only use light oil to lubricate the
tool. Other lubricants may not be suitable and could damage the tool or cause a
malfunction during use.
Visit www.princessauto.com for more information
20V Li-Ion Cordless Brushless Compact Band Saw
9095746
15
Advertisement
Table of Contents
