Setting The Table For Horizontal Or Bevel Cutting - Power Fist SS13W Owner's Manual

ASSEMBLY
WARNING: FOR YOUR OWN SAFETY, NEVER CONNECT PLUG TO POWER SOURCE OUTLET UNTIL ALL ASSEMBLY
STEPS ARE COMPLETE, AND YOU HAVE READ AND UNDERSTOOD THE SAFETY AND OPERATIONAL INSTRUCTIONS.
• Lift the saw by the frame and base and place scroll saw on work bench
• Familiar yourself with the controls and features of this scroll saw indicated in the illustration
NOTE: When you mount the frame to the base, you must first place 2 taper pins (see No.39 and No.40 in the
assembly diagram - page 12) into the holes on the base across the frame. You then mount the 4 bolts and tighten
them.
SETTING THE TABLE FOR HORIZONTAL
OR BEVEL CUTTING
• The scroll saw work table can be titled to the left
for bevel cutting up to 45º from the 0º or horizontal
cutting position
• A bevel scale is provide under the work table as a
convenient reference for setting the approximate
table angle for bevel cutting
GUARD
AIR TUBE
TABLE
TABLE
LOCKKNOB
BEVEL
SCALE
For any technical questions, please call 1-800-665-8685
FRAME
BLADE
SWITCH
BASE
BEVEL
SCALE
5
8159642