Table of Contents
Advertisement
Available languages
Available languages
V1.0
WARNING! After using, remove the battery pack and clean the insides of the
upper guard. Sawdust accumulation interferes with the functionality of the
lower guard.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Only use accessories intended for use with this tool.
4.
Keep the tool handles or gripping surfaces clean and dry.
5.
Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
6.
Clear the vents of any dirt, dust and debris on a regular basis to
prevent the tool from overheating.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
BATTERY MAINTENANCE
Avoid the risk of battery short circuits during transport, storage or disposal
by isolating both terminals with adhesive tape or pack the battery in a
plastic bag or a cardboard box.
1.
The longest life and best performance can be obtained if the battery
pack is charged when the air temperature is between 50 to
86°F (10 to 30°C). Do not charge the battery when the temperature is
below 32°F (0°C) or above 104°F (40°C). This is important and will
prevent damage to the battery pack.
2.
Charge the battery at rates recommended by the manufacturer.
CLEANING
1.
Remove all swarf from the machine with a vacuum cleaner or
compressed air. Focus on removing dust from the motor' s fan vents.
2.
Thoroughly clean all surfaces.
Visit www.princessauto.com for more information
20V 6-1/2 in. Li-ion Cordless Circular Saw
9049032
15
Advertisement
Table of Contents
