Specifications; Work Area; Personal Safety - Power Fist SS13W Owner's Manual

SPECIFICATIONS

Overall Dimensions & Specifications:
1. Max. cutting thickness:
2. Max. cutting swing:
3. Blade length:
4. Cuts per minute:
5. Table size:
6. Table tilt:
7. Net weight:
8. Gross weight:
9. Packing size:
10. Voltage
Note: Performance of this tool (if powered by line voltage) may vary depending on variations in local line voltage.
Extension cord usage may also affect tool performance.
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Keep this
manual for the safety warnings and precautions, operating, inspection and maintenance
instructions. When using this tool, basic precautions should always be followed to reduce
the risk of personal injury and/or damage to the equipment.

WORK AREA

1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use in damp or wet locations.
Do not expose to rain. Do not use in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Do not let them handle tools or
extension cords. No one should be in the work area if they are not wearing suitable protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust.
Always lock up tools and keep them out of reach of children.

PERSONAL SAFETY

1. Use eye, breathing protection. Always wear ANSI approved impact safety goggles, which must provide
both frontal and side protection. Wear an ANSI approved dust mask or respirator when working around
metal, wood and chemical dusts and mists.
2. Do not overreach; keep proper footing and balance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.
3. Dress properly, wear protective equipment. Do not wear loose clothing or jewelry as they can be
caught in moving parts. Tie back long hair. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working.
4. Stay alert, watch what you are doing and use your common sense. Do not operate any machine or
tool when you are tired, under the influence of drugs, alcohol or medications.
Scroll Saw
50mm
330mm(SS13W)/ 400mm (SS16W) / 560mm (SS22W)
127mm
750-1500/min
250x330mm (SS13W) / 250x330mm (SS16W) / 250x410mm (SS22W)
0º to 45º
10kg(SS13W)/11kg (SS16W)/20kg(SS22W)
11kg (SS13W) / 12kg (SS16W) / 22kg (SS22W)
410x380x180mm (SS13W), 480x390x180mm (SS16W),
640x420x180mm (SS22W)
230 volts, 50 Hz alternating current
For any technical questions, please call 1-800-665-8685 For any technical questions, please call 1-800-665-8685
SS13W (SS16W SS22W) SCROLL SAW
2 2
8159642