Port Utilization - D-Link DGS-3427 User Manual

Port Utilization

The Port Utilization page displays the percentage of the total available bandwidth being used on the port.
To view the port utilization, open the Monitoring folder and then the Port Utilization link:
To select a port to view these statistics for, first select the line card slot in the chassis switch by using the Unit pull-down
menu and then select the port by using the Port pull down menu. The user may also use the real-time graphic of the Switch
and/or switch stack at the top of the web page by simply clicking on a port.
Change the view parameters as follows:
Parameter
Time Interval [1s ]
Record Number [200]
xStack DGS-3400 Series Fast Ethernet Switch
Figure 10- 4. Port Utilization window
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
174