Centsys D5-Evo Installation Manual page 27

3. When joining two lengths together,
simply butt each section firmly together
to ensure the correct pitch.
Mount the origin marker
1. Close the gate completely.
2. Mount the origin marker to the rack a
minimum of 500mm from the origin
sensor. Refer to Figure 31, isometric view
A or plan view B.
It is possible to make the distance
between the marker and the
sensor much greater than 500mm.
However, if using the pedestrian
opening facility, although the
position of the marker will not
affect the width of the pedestrian
opening, it is preferable to have
the marker mounted inside of the
pedestrian opening point.
Butt firmly
Isometric view A
Origin Origin
sensor sensor
Plan view B
Origin
sensor
page 25
together
FIGURE 29
FIGURE 30
Origin Origin
marker marker
500mm
Origin
marker
FIGURE 31
Gate
closed