Centsys D5-Evo Installation Manual page 25

Steel rack
1. Fix rack using the steel angle brackets
provided.
2. Brackets must be spaced no more than
300mm apart.
3. When joining different lengths of steel
rack, a simple way of ensuring correct
pitch spacing, is to clamp a small off-cut
between the two pieces.
RAZ rack
1. Fix the RAZ rack to the side of the gate
using the TEK screws provided. Use the
vertical slots in order to allow
adjustment.
2. Use at least three TEK screws per half
metre section of rack.
page 23
FIGURE 24
FIGURE 25
FIGURE 26