Fuse Protection; Icons Used In This Booklet - Centsys D5-Evo Installation Manual

Duty cycle - mains present
Operations in standby with 7Ah battery
half day
full day
Operations in standby with 35Ah battery
half day
full day
Collision sensing
Operating temperature range
Onboard receiver type
Receiver code storage capacity
Receiver frequency
Mass of unit packed (standard kit, excl.
rack and battery)
Packing dimensions (standard kit, excl.
rack and battery)
Based on a push force of less than 50% of rated
Based on 4m gate, no accessories fitted, such as infrared beams

Fuse protection

The following protection fuses are provided on the system:
Item
Main controller
Motor circuit
Light circuit
Auxiliary supply
Charger
Mains input
*Not user serviceable
4. Icons used in this manual
This icon indicates tips and other
information that could be useful
during the installation.
This icon indicates warning, caution or attention! Please take special note of critical
aspects that MUST be adhered to in order to prevent injury.
50%
44
35
150*
150*
electronic
-15°C to +50°C
CENTSYS code-hopping multichannel
500 transmitter buttons
433MHz
10kg
231mm deep x 303mm wide x 432mm high
Type
Automotive fuse ATO (25 x 7mm)
5 x 20mm
Resettable fuse
5 x 20mm
page 8
Limited by maximum daily usage
Rating
30A
3A fast blow
3A
3A fast blow*
This icon denotes variations and other
aspects that should be considered
during installation.