Table of Contents
Advertisement
IMPORTANT
Safety Instructions
ATTENTION
To ensure the safety of people, it is important that you
read all the following instructions. Incorrect
installation or incorrect use of the product could
cause serious harm to people.
The installer, being either professional or DIY, is the
last person on the site who can ensure that the
operator is safely installed, and that the whole system
can be operated safely.
Warnings for the installer
CAREFULLY READ AND FOLLOW ALL INSTRUCTIONS
before beginning to install the product.
All installation, repair, and service work to this product must
be carried out by a suitably qualified person
Do not activate your gate opener unless you can see it and can
determine that its area of travel is clear of people, pets, or
other obstructions
NO ONE MAY CROSS THE PATH OF A MOVING GATE.
Always keep people and objects away from the gate and its
area of travel
NEVER LET CHILDREN OPERATE OR PLAY WITH THE
GATE CONTROLS
Secure all easily accessed gate opener controls in order to
prevent unauthorized use of the gate
Do not in any way modify the components of the automated
system
Do not install the equipment in an explosive atmosphere: the
presence of flammable gasses or fumes is a serious danger to
safety
Before attempting any work on the system, cut electrical
power to the operator and disconnect the batteries
The mains power supply of the automated system must be
fitted with an all-pole switch with contact opening distance of
3mm or greater. Use of a 5A thermal breaker with all-pole
circuit break is recommended
Make sure that an earth leakage circuit breaker with a
threshold of 30mA is fitted upstream of the system
Never short circuit the battery and do not try to recharge the
batteries with power supply units other than that supplied
page 3
Hide quick links:
Advertisement
Table of Contents
