Table of Contents
Advertisement
WARNING!
Endstops are mandatory and must be fitted to prevent death
or accidental injury should the gate overrun its limits
Guide-rollers and anti-lift brackets
Guide-rollers must ensure that the gate is held vertically
For improved safety, fit additional support post to prevent gate from falling over if
guide-rollers fail
To prevent unauthorised access fit anti-lift brackets as shown
The gap between the anti-lift bracket and the gate must be less than 5mm
Ensure that the gate cannot be lifted off the motor pinion with the anti-lift
bracket fitted.
Guide-rollers
Additional
support post
FIGURE 4 FITTING GUIDE-ROLLERS
page 12
GAP<5mm GAP<5mm
GAP<5mm GAP<5mm
Hide quick links:
Advertisement
Table of Contents
