Centsys D5-Evo Installation Manual page 28

3. For steel rack mount the origin marker
onto the rack using the bracket provided.
4. Weld the bracket to the rack.
5. Bolt the origin marker onto the bracket
using the fasteners provided.
6. With the RAZ rack the origin marker
mounts directly on top of the rack without
a bracket.
7. Drill mounting holes directly into the rack
and bolt into position.
8. File away the front lip of the rack if you
need to move the origin marker closer to
the operator as the gate slides past.
9. With nylon angle rack it is necessary to use
the bracket provided.
10. It is preferable
fasteners to secure the bracket into the
side of the nylon angle rack as shown.
11. Make a small tack weld to secure the back
of the bracket onto the angle iron section
of the rack.
12. Bolt the origin marker onto the bracket
using the fasteners provided.
to use self-tapping
page 26
Steel rack
Bolt using
fasteners
provided
Origin marker
bracket
Weld mounting
bracket provided to
steel rack
RAZ rack
Nylon angle rack
Bolt using
fasteners
provided
Origin marker
bracket
Screw into
side of the
nylon rack
FIGURE 32
FIGURE 33
FIGURE 34